Find an Expert
Metallic Surfaces and Structures, Oil and Gas Corrosion, and Alternative Fuels Corrosion Inhibitors
Expert was taught in the field of Ferrous Metallic Corrosion as early as 1974 to become Director of Research & Development for the Laboratoires SECUR in Antwerp, Belgium in 1978. Expert worked on training and supervising the FEO 23 Surface…
Corrosion Engineering, Materials Selection, Failure Analysis, Welding Engineering, Heat Treatment
Expert has PhD in Materials Science and Engineering and more than 12 years experinces in Oil and gas industries, onshore, ofshore and subsea. He is expert in welding, writing WPS, preparing welding book, PQR etc. Expert has been involved in…
Engineering Cokeless Furnaces, Slurry Pipelines, Slurry Hydrocracking, Oilsand Engineering, and Tailings
Expert is a specialist in the design of gas-fired furnaces for melting of metals. He received in 2017 a grant from the National Science Foundation for the design of a cokeless melting system for ferrous castings. Expert is the author…
Surface Technology, Coatings, Thin Film Deposition, PVD, Physical Vapour Deposition, Sputtering, PLD
He studied materials science with a focus on thin film materials, focussing in his PhD on process equipment and design of room-temperature deposited coating. As post-doc, he was employed to scale up deposition process from laboratory to industrially useable process…
Aluminium Wire Production and Products
Expert graduated in Metallurgy at the University of Sheffield in England and went on to complete a PhD in the thermodynamics and electrochemistry of high temperature, pseudo refining reactions. His first role in industry required the use of this electrochemical…
Influent, Boiler, Cooling and Waste Treatment, Refinery, Petrochemical, Steel, Paper
Ms. Expert has an Bachelor's Degree in Science and a Master's Degree in Environmental Engineering. Expert has experience in the field of municipal water and wastewater treatment. Expert worked for a large municipal drinking water treatment plant and has several…
Material Selection, Corrosion Inhibition, and Failure Analysis in Oil and Gas (E&P) and the Chemical Industry
Expert's major contributions are in the area of materials selection, corrosion failure analysis and corrosion inhibition. 1. Optimized Material selection, process control and chemical treatment for the feasibility report (FR) for Oil and Gas field development/Revamping with modifications & Chemical…
Surface Engineering, Diamond like hard coating, material science, Medical device, hard disk
Most of Expert's scientific career has been devoted to the development of surface modification and thin film deposition technologies, including plasma nitriding, plasma carbonization, boriding, chromizing, cathodic arc, filtered cathodic arc, pulsed laser ablation, magnetron sputtering, pulsed mid-frequency dc magnetron…
Metallurgical Engineering, Corrosion Engineering, Marine & Pipeline Corrosion, Cathodic Protection
Expert has performed research in aqueous corrosion, primarily in seawater. He has provided assistance in the design of equipment and facilities exposed to aqueous environments, including seawater, freshwater, potable water and wastewater. As seawater contains substantial amount of chloride, this…
Electrodeposition, Corrosion, Wet Etching, Thin Films, Nanofabrication, Electrocatalysis
Expert obtained his B.E. in Chemical and Biochemical Engineering (1994) from University of Belgrade and his Ph.D. in Science and Engineering of Materials (1999) from Arizona State University. Before joining the ECE department at Employer (September 2005), Expert has spent…