Find an Expert
Aluminium Wire Production and Products
Expert graduated in Metallurgy at the University of Sheffield in England and went on to complete a PhD in the thermodynamics and electrochemistry of high temperature, pseudo refining reactions. His first role in industry required the use of this electrochemical…
Metallurgical Engineering, Corrosion Engineering, Marine & Pipeline Corrosion, Cathodic Protection
Expert has performed research in aqueous corrosion, primarily in seawater. He has provided assistance in the design of equipment and facilities exposed to aqueous environments, including seawater, freshwater, potable water and wastewater. As seawater contains substantial amount of chloride, this…
Electrodeposition, Corrosion, Wet Etching, Thin Films, Nanofabrication, Electrocatalysis
Expert obtained his B.E. in Chemical and Biochemical Engineering (1994) from University of Belgrade and his Ph.D. in Science and Engineering of Materials (1999) from Arizona State University. Before joining the ECE department at Employer (September 2005), Expert has spent…
Materials Science, Particularly Corrosion: Microbial Corrosion, Materials Selection, Biodegradation
Biodegradation mainly refers to enhanced degradation and deterioration of non-metallic materials such as concrete and polymers to distinguish it from microbial corrosion of metals. Under certain circumstances, there are groups of micro-organisms that are capable of attacking these materials and…
Forensic Engineering, Metallurgy and Materials Engineering, Failure Analysis
As a metallurgist and Professor of Engineering, he has taught about the microstructural design of cast irons and the properties associated with each microstructure. He has also investigated failures of cast iron components under varied service conditions. As a metallurgist…
Textile Flammability and Dyes, QC for Color, Textile Environmental, Training
Expert has over 25 years experience with bleaching textile materials composed of cotton, flax, wool, polyester and viscose on a full range of equipment including continuous steaming(roller and flatbed), jiggers, pad-batch, jets yarn package, skein and garment laundry. He is…
Fiber Reinforced Composites, Bio-Based Materials, Phenolic Resin Technology
Expert is very knowledgeable in composite materials involving a reinforcing fiber [such as E and S glass], Carbon Fiber, and Organic fiber such as Aramid and organic matrix resins based on thermosetting and thermoplastic resins with the TS resins being…
Paint, Coating Consulting, Failure Analysis, Laboratory Testing, Inspection, Expert Witness
Expert has been the chair, and has participated in SSPC and NACE surface preparation committees regarding paint. He is the USA delegate to ISO TC35 SC12 "Surface Preparation prior to Paint Application". Expert is familiar with most USA and European…
Corrosion, Materials, & Chemicals: Oil & Gas Production and Wastewater Treatment Facilities
Expert is experienced in materials engineering, corrosion control and mitigation, failure analysis, root cause analysis, materials selection, non-metallic materials, protective coatings, cathodic protection, environmental control, specifications and standards. He has made contributions in pipeline corrosion integrity management, risk assessment, risk-based…
Industrial Chemical Production, Natural Gas Conversion to Liquid Fuels, Fine Chemicals, and Energy e
In general, chemical compounds that have multiple bonds (Double or Triple), they can accept addition reactions. The reaction could proceed either by nucleophilic, or electrophillic addition reactions. In some special cases, it can be controlled either thermodynamically, or kinetically. Activation…