Find an Expert
Resistance Welding, Laser Welding, Arc Welding, Ultrasonic Welding, Brazing, and Soldering
He has extensive experience in brazing starting with his PhD (Penn State) in brazing of structural ceramics. He worked on the Alumnia-Titanium system using an active braze alloy of Ag-Cu-Ti composition. Active brazing has found wide acceptance in brazing of…
Materials for Electronic Applications
Expert has successfully writen 2 proposals for EPA SBIR grants. The first was for a phase 1 program for the recovery and regeneration of spent etchants. This successful program was followed by a phase 2 proposal and award. That phase…
Biotechnological Pharmaceutical Chemical Process Development Design Engineering
Expert has applied his extensive background in chemical engineering in various areas including pharmaceutical process and product development; developing new products for pharmaceutical and consumer industries; process, equipment, and analytical method validation in biotechnology areas; and designing and improving various…
Metal Finishing, Parts Cleaning, Electroplating, Electroforming
Expert has production experience with cyanide copper, pyrophosphate, and acid copper plating baths. He has worked in a laboratory environment with both the fluoroborate and alkaline non-cyanide baths. He has used these baths for PWB plating, wafer plating, electroforming, plating…
Plastic and Coating Stabilization; Controlled Degradation Analysis and Design; Analytical Services
Expert's knowledge in the area of amorphous and crystalline polymers is based on 36 years in the field, having worked with all commercially available amorphous, crystalline, and semicrystalline resins. His knowledge includes physical properties and stabilization at many levels and…
Adhesive Consulting, Formulating, & Research in Structural, PSA, Hot Melt, Epoxy, Urethane, & Wood
Expert D. Expert has done adhesive failure analysis projects in connection with establishing cause in litigation cases or in research and production problems. For example, a wood millwork manufacturer claimed an adhesive was faulty, resulting in customer loss and damages.…
Corrosion and Metallurgical Failure Analysis
Expert notes that corrosion is a major problem that affects many industries. Expert has spent over forty years studying and solving corrosion problems in the construction, aerospace, defense, petroleum, utility and related industries. He was also the technical editor of…
Nondestructive Testing and Evaluation; Machine and Structural Design
Expert has been at (Undisclosed) where he currently is a professor in the Department of General Engineering. Expert is also Director of the Nondestructive Testing and Evaluation Research Laboratory. The Laboratory supports research work in ultrasonics (immersion, air-coupled, and water-squirt),…
Wood Adhesives and Wood Composite Products
Expert has been an active research scientist in the area of wood adhesives for more than 27 years. He has carried out research on the thermosetting bonding of wood particleboards using urea-formaldehyde (UF) resins in the laboratory to optimize the…
Mechanical Engineering Design and Prototype Development
Expert received a Ph.D. in mechanical engineering from the University of California, Berkeley (UCB), with an emphasis in composite manufacture and analysis. His Ph.D. dissertation dealt with manufacturing analysis for axisymmetric composite structures. Part of the research included building a…